UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 56773

Vivado 2013.2 - Zynq Processing System Package Property CONFIG.PCW_PACKAGE_NAME mismatch to design setting

Description

The Zynq Processing System in a 2013.2 Vivado IP Integrator Block Design is not set to the correct package type.

Property - CONFIG.PCW_PACKAGE_NAME

For a XC7Z030-1FBG676C design, this property is set to CLG484.

Solution

To work around this issue, follow the steps below:

  1. In the Vivado Tcl console change the read_only property to be editable:
    set_param bd.propagate.allow_set_readonly_param 1
  2. Then modify the property:
    set_property CONFIG.PCW_PACKAGE_NAME fbg676 [get_bd_cells /processing_system7_1]


The example above will change the PCW_PACKAGE_NAME to FBG676 for the processing_system7 IP.

This issue is fixed starting in Vivado 2013.3.
AR# 56773
Date Created 07/16/2013
Last Updated 11/21/2014
Status Active
Type General Article
Devices
  • Zynq-7000
Tools
  • Vivado Design Suite - 2013.2
IP
  • Processing System 7