We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 56845

2013.3 Vivado - Critical warning [project 1-475] when opening up a ZC702 project created in Vivado Design Suite 2013.2 in Vivado 2013.3


When trying to opening a Vivado 2013.2 ZC702 project in 2013.3, a critical warning is displayed in the console window similar to below:

[Project 1-475] Current project option Board - 'xilinx.com:zynq:zc702:3.0' not found in any board repository. Board related information is not loaded in the current project. 
Please run 'get_boards' Tcl command to view list of applicable boards and set appropriate board using Tcl command 'set_property BOARD <appropriate board> [current_project]' or set interactively using GUI from 'Project Settings'.

How can I address this issue?


This occurs because of an issue in Vivado 2013.2 where the board version for the Zynq zc702 board is incorrectly listed as 3.0.

The incorrect board listing was corrected in Vivado 2013.3. However, this will cause the message above.

To correct this issue, enter the TCL command below in the TCL console in Vivado:

set_property board "xilinx.com:zynq:zc702:1.0" [current_project]
AR# 56845
Date Created 07/23/2013
Last Updated 04/17/2014
Status Active
Type General Article
  • Zynq-7000
  • Vivado Design Suite - 2013.2