UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 57051

2013.04 PetaLinux - How do I update the flash partition map in my device tree (DTS)?

Description

I tried to manually modify the flash partition map in my device tree (DTS), but when I execute "build all", the DTS gets modified back to "default" values for my flash partition map.

How do I update the flash partition map in my device tree?

Solution

For flash partitions you will need to modify from the menuconfig.

You can run make appconfig in the $PETALINUX/software/petalinux-dist/ directory and set the desired configuration in:

System Settings --->
      Flash Partition Table --->
AR# 57051
Date Created 08/08/2013
Last Updated 01/28/2014
Status Active
Type General Article
Devices
  • Zynq-7000
  • SoC
Tools
  • PetaLinux - 2013.04
  • PetaLinux