UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 57129

14.6 SDK - XMD hits segmentation fault when trying to connect to device specifying "-cable type digilent_plugin"

Description

Is the Digilent Plug-in Supported in SDK? If I try to connect to a device in XMD specifying "-cable type digilent_plugin", I get a segmentation fault.

How can I address this?

Solution

Support for the Digilent Plug-in has deprecated in XMD. Users are recommended to use the xilinx_tcf Plug-in.

The hw_server gets started automatically, if not started already, whenever the user runs a connect command in XMD and the xilinx_tcf is selected by default.

Users do not need to specify the cable type, doing so will result in the segmentation fault.

AR# 57129
Date Created 08/15/2013
Last Updated 08/15/2013
Status Active
Type General Article
Devices
  • Zynq-7000
  • Artix-7
  • Kintex-7
  • Virtex-7
Tools
  • EDK - 14.6
  • Vivado Design Suite - 2013.2