We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 57150

2013.2 Vivado Timing - Incorrect Inter-SLR compensation for data path that does not cross SLR boundary in SSI device


When I was reviewing my timing report, I noticed an incorrect Inter-SLR compensation being used on the data path that does not cross an SLR boundary. The inter-SLR compensation should only apply to paths that cross SLR boundary. The expectation in this case is that the inter-SLR compensation should be zero (and not an extremely large inter-SLR compensation).

When is this going to be fixed?


This is a known issue and is scheduled to be fixed in the next release of the software.


Associated Attachments

Name File Size File Type
AR57150_CR728321_Timing-vivado-patch.zip 3 MB ZIP
AR# 57150
Date Created 08/16/2013
Last Updated 08/23/2013
Status Active
Type General Article
  • Vivado Design Suite - 2013.2