We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 57332

Vivado Timing - How can I change the timing constraint in the design and check the timing report without rerunning Implementation?


After Implementation, how can I change the timing constraint and then check the timing result without rerunning Implementation?


Below are two solutions:

1. In the Implemented Design, set the new timing constraints in the Tcl console and then run report_timing or report_timing_summary

2. Create a Tcl script with the new timing constraints in it and set it in the tcl.post option of route_design in Implement Settings. 

This will run cause report_timing or report_timing_summary to run after Implementation completes.

AR# 57332
Date 01/07/2015
Status Active
Type General Article
  • Vivado Design Suite - 2013.2
  • Vivado Design Suite - 2013.3
  • Vivado Design Suite - 2013.4
  • More
  • Vivado Design Suite - 2014.1
  • Vivado Design Suite - 2014.3
  • Vivado Design Suite - 2014.4
  • Less
Page Bookmarked