UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 57382

GTX - TXPHINITDONE does not go High during simulation in ISIM

Description

During phase alignment of master/slave GTX, the TXPHINITDONE of slave GTX does not go High.

Solution

This problem only happens when the RX side of the transceiver is not used. This is a known issue in ISIM and CR#735397 has been filed.

You can use one of the following as a work-around:

  • Use ModelSim for simulation.
  • Instead of ISE design tools, use the Vivado tool.
  • Include dummy RX channels in the design by unchecking "RX OFF" on page 2 of 7 series transceiver wizard as shown below:

AR# 57382
Date Created 09/05/2013
Last Updated 09/26/2013
Status Active
Type Known Issues
Devices
  • Kintex-7
Tools
  • ISE Design Suite - 14
IP
  • 7 Series FPGAs Transceivers Wizard