We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 57437

MIG 7 Series QDRII+ - SIM_BYPASS_INIT_CAL="SKIP" is not supported for simulations


Version Found: v2.0
Version Resolved: See (Xilinx Answer 54025)

Simulation parameter SIM_BYPASS_INIT="SKIP" is not supported for QDRII+ interface types. Calibration might never complete if SKIP is used.


The 7 Series FPGAs Memory Interface Solutions v2.0 User Guide (UG586) suggests that SKIP is a supported value for the SIM_BYPASS_INIT parameter, but this is incorrect.

The following are the only supported values for the SIM_BYPASS_INIT parameter:


Revision History
09/12/2013 - Initial release

AR# 57437
Date Created 09/11/2013
Last Updated 09/26/2013
Status Active
Type Known Issues
  • Virtex-7
  • Kintex-7
  • Artix-7
  • MIG 7 Series