We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 57495

14.6 iMPACT - BPI Indirect Programming of flash fails while using Virtex-7 580T


Indirect Programming fails with the following message in the console when programming BPI Flash via a Virtex-7 580T using iMPACT 14.6. 

'0': Errors encountered while loading microprogram.
INFO:Cse - Failed to query common flash interface. '1': Configuration data download to FPGA was not successful. DONE did not go high, please check your configuration setup and mode settings. PROGRESS_END - End Operation

How can I get BPI indirect programming to work?


Use 14.2 iMPACT or contact technical support for an updated core file for 14.6.
AR# 57495
Date Created 09/17/2013
Last Updated 09/26/2013
Status Active
Type General Article
  • Virtex-7 HT
  • ISE Design Suite - 14.6