UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 57661

PlanAhead - The Termination column of the Pad Report does not show PULLUP/PULLDOWN for Virtex-6 Low Power devices

Description

If you create a pad report in the PlanAhead tool for a Virtex-6 Low Power device project, the termination column shows a blank value instead of PULLUP/PULLDOWN for I/O pins.

Solution

This is issue only affects Virtex-6 Low Power devices.

The correct PULLUP/PULLDOWN value of the I/O can be found in the PlanAhead tool itself.

AR# 57661
Date Created 09/26/2013
Last Updated 10/09/2013
Status Active
Type Known Issues
Devices
  • Virtex-6
Tools
  • PlanAhead