We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 5788

NGDBuild - "ERROR:based:58 - On or above line 890 in file "repic.edf" occurs when I use a Synplify netlist


Keywords: Synplicity, Synplify, 5200, NGDBuild, EDIF, XNF

Urgency: Standard

General Description:
When I target an XC5200 family using Synplicity 5.0.8 or earlier, the following error occurs in NGDBuild:

"ERROR:based:58 - On or above line 890 in file "repic.edf": Bad portRef "I5" in net "U2_inst_repic_code_slow_flashZ0". This likely means that the EDIF netlist was improperly written. Please contact the vendor of the program that produced this EDIF file."


This happens if Synplify generates an EDIF as a netlist.

To avoid this problem, use XNF instead of EDIF for an XC5000 flow.
AR# 5788
Date Created 03/03/1999
Last Updated 11/06/2003
Status Archive
Type General Article