We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 57882

2013.4 Vivado IP Integrator - Create, Import Peripheral Wizard generated IP is missing the Support Narrow Burst parameter on the AXI4 Master Interface


If IP is generated using the Create, Import Peripheral Wizard (CIP) in Vivado 2013.3, the Support Narrow Burst on the AXI4 Master Interface is missing.

This leads to a critical warning in the generated BFM example design:

CRITICAL WARNING: [BD 41-237] Bus Interface property SUPPORTS_NARROW_BURST does not match between /slave_0/S_AXI(0) and /myip_0/M00_AXI(1)

How can this be addressed?


To fix this issue, the custom IP must be updated to include the SUPPORTS_NARROW_BURST parameter.

To do this:

  1. Right-click on the IP in the BFM example design and select Edit in IP Packager.
    This will open the Package IP GUI.
  2. Select the IP Interfaces, Highlight the Master AXI interface. Then select the Bus Parameters tab as shown below:
  3. Right-click under the existing DATA_WIDTH and select Add Bus Parameter, and call it "SUPPORTS_NARROW_BURST"

  4. Once this is added, set the parameter to 0:

  5. Once this is complete, select Review and Packager from the Package IP GUI, and click the Re-Package IP button.

This issue is resolved in Vivado 2014.1.

AR# 57882
Date Created 10/09/2013
Last Updated 04/16/2014
Status Active
Type Known Issues
  • Vivado Design Suite - 2013.3
  • Vivado Design Suite - 2013.4