UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 57890

LogiCORE IP Video Scaler v8.0 - Why do I get an error saying that the "data type of 4:4:4 is not supported" when using auto parameter propagation?

Description

Why do I receive an error message that "data type of 4:4:4 is not supported" when using auto parameter propagation?

[xilinx.com:ip:v_scaler:8.1 100]/v_scaler_1 Propagated type xilinx.com:video_G_B_R_444:1.0 is not supported

Solution

There is a known issue in the Video Scaler v8.0 and v8.1 where it will not support RGB mode when used in Vivado IP Integrator. 

This issue will be addressed in a future release of the core.

You can work around the issue by using the LogiCORE IP RGB2YCrCb between the source and the Video Scaler.

This allows the Video Scaler to work in 4:4:4 YUV mode.

Linked Answer Records

Master Answer Records

Answer Number Answer Title Version Found Version Resolved
54540 LogiCORE IP Video Scaler - Release Notes and Known Issues for Vivado 2013.1 and newer tool versions N/A N/A
AR# 57890
Date Created 10/09/2013
Last Updated 08/19/2014
Status Active
Type General Article
IP
  • Video Scaler