UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!
Page Bookmarked
  1. Xilinx - All Programmable
  2. Support
  3. AR# 57897: 14.7 EDK, AXI Ethernet v3.01.a - Support for 7 Series Devices in ISE Design Suite

AR# 57897

14.7 EDK, AXI Ethernet v3.01.a - Support for 7 Series Devices in ISE Design Suite

Description

This answer record documents the current state of support for AXI Ethernet on the 7 series devices using the ISE-EDK flow.

Solution

NOTE: It is highly recommended that production designs using AXI Ethernet IP on the 7 series devices use Vivado 2013.2 or later version of the tools.

Artix-7

  • Support restricted to MII, GMII and RGMII modes only.
  • No hardware verification has been completed on this version of the core.

Virtex-7

  • Support restricted to MII, GMII and RGMII modes only.
  • No hardware verification has been completed on this version of the core.

Kintex-7

  • No hardware verification has been completed on this version of the core.

Zynq-7000

  • Support restricted to MII, GMII and RGMII modes only.
  • Support restricted to 7Z010, 7Z020, 7Z030 and 7Z045 devices only.
  • No hardware verification has been completed on this version of the core.
AR# 57897
Date 11/26/2013
Status Active
Type General Article
Devices
  • Zynq-7000
  • Virtex-7
  • Kintex-7
  • Artix-7
Tools
  • EDK - 14.4
  • EDK - 14.5
  • EDK - 14.6
  • EDK - 14.7
IP
  • AXI Ethernet