UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 58119

2013.3 Vivado IP Integrator - Cannot assign external bus interface to AXI Slave on AXI APB bridge

Description

In a simple Vivado IP Integrator project containing an AXI APB bridge, I cannot assign an External Bus Interface to the AXI Slave on the AXI APB bridge.

How can this be addressed?

Solution

To work around this issue, download the attached patch and follow the instructions below.

Step 1: 

Unzip and copy this folder onto your local machine.

Step 2:

In the Vivado tool, open the IP Catalog under Project Manager and select IP Settings as shown below:

             



Step 3: 

Point to the local_ip_cores folder from the zip file.

Select Apply, and OK.

             


This IP will then be available in the IP catalog.

This IP is the same version (2.0) as the version in the 2013.3 install. 

However, IP added in the repository will take precedence.

This issue is fixed starting in Vivado 2013.4.

Attachments

Associated Attachments

Name File Size File Type
AR58119.zip 36 KB ZIP
AR# 58119
Date Created 10/24/2013
Last Updated 11/18/2014
Status Active
Type General Article
Tools
  • Vivado Design Suite - 2013.3
IP
  • AXI TO APB bridge