UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 58333

Vivado Simulator - How to tell Vivado where ModelSim/QuestaSim is installed on the machine?

Description

How do I tell Vivado where ModelSim/QuestaSim is installed on the machine?

 

When both ModelSim and QuestaSim or multiple ModelSim/QuestaSim versions are installed on the machine, how do I tell Vivado which one to use for simulation?

Solution

To define the ModelSim/QuestaSim installation path:

1. Select Tools > Options > General

2. In the Vivado Options, General dialog box, scroll down to the QuestaSim/ModelSim install path field, as shown in the following figure, and browse to the appropriate installation location.

modelsim.png




AR# 58333
Date Created 11/10/2013
Last Updated 02/03/2015
Status Active
Type General Article
Devices
  • FPGA Device Families
Tools
  • Vivado Design Suite