We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 58366

PetaLinux - Which Linux Device Driver Should I Use for My Third-Party IP Core?


I am attempting to integrate a third-party IP core into my Linux system. Which device driver should I specify in my Linux device tree?


For a complete description of the proper driver and device tree parameters to use for your target IP, please contact your IP vendor.

Below is a list of common IP and Linux device drivers that have worked in the past. This list may not reflect the current state of device driver support.

IP Name Linux Device Driver
IntelliProp SATA/AHCI Controller $LINUX_KERNEL_SOURCE/drivers/ata/sata_highbank.c (compatible = "calxeda,hb-ahci")
Xylon Logic FB $LINUX_KERNEL_SOURCE/drivers/video/xylon/xylonfb/core/xylonfb.c (compatible = "xylon,logicvc-3.00.a")


AR# 58366
Date 01/28/2014
Status Active
Type General Article
  • SoC
  • FPGA Device Families
  • Zynq-7000
  • More
  • Artix-7
  • Kintex-7
  • Virtex-7
  • Less
  • PetaLinux
Page Bookmarked