UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 58486

Vivado 2013.3, axi_apb_bridge - [BD 41-1273] Error running post_propagate TCL procedure: can't read "o": no such variable

Description

When creating a simple IPI design using an axi_apb_bridge IP hooked up to top level ports, a BD error happens when trying to validate the design.

 

 [BD 41-1273] Error running post_propagate TCL procedure: can't read "o": no such variable
    ::xilinx.com_ip_axi_apb_bridge_2.0::post_propagate Line 220

 

Why was the design not able to be validated?

 

 

Solution

The issue happens WHEN the PRI_EXERCISER slave address memory is not mapped with the AXI_APB interface.
 
Once the slave address is mapped correctly, the AXI_APB bridge error messages are not displayed.

This issue is fixed in Vivado 2013.4.
AR# 58486
Date Created 11/20/2013
Last Updated 09/24/2014
Status Active
Type General Article
Devices
  • Zynq-7000
Tools
  • Vivado Design Suite - 2013.3