UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 58630

DDS v6.0 - The output of DDS compiler version v6.0 is different than the DDS compiler version v5.0

Description

In the DDS Compiler version v6.0, when the non-zero values have been set in the GUI, or the XCO or XCI for programmable Phase Increment or programmable Phase Offset, the output for DDS compiler v6.0 will have different values on all data outputs than DDS compiler v5.0.

Solution

This is a known issue with DDS Compiler v5.0.

The affected configurations are: Phase Increment = Programmable, or Phase Offset = Programmable.

To work around this issue, the recommendation is to change the configuration values for PINC1 through PINC16 and POFF1 through POFF16 to zero.

AR# 58630
Date Created 12/03/2013
Last Updated 12/03/2013
Status Active
Type General Article
IP
  • DDS Compiler