We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 58885

Xilinx Simulation Solution Center - Design Assistant - TCL Simulation Commands


This Answer Record contains child answer records covering TCL command Issues in Vivado Simulator. The answer records provides explanation of these issues which you may face while using TCL commands. The answer record also contains information related to known issues and good coding practices.

Note: This article is part of Xilinx Simulation Solution Center Xilinx Answer 58795. The Xilinx Simulation Solution Center is available to address all questions related to Simulation. Whether you are starting a new design with Vivado Simulator or troubleshooting a problem with a supported third party simulator, use the Xilinx Simulation Solution Center to guide you to the right information.


VCD (Value Change Dump) Tcl Commands

(Xilinx Answer 53351) How to create a .vcd file in Vivado XSIM?

SAIF (Synopsys Activity Interchange Format) Tcl Commands

(Xilinx Answer 63905) How do I create a .saif file in Vivado XSIM?

FORCE Tcl Commands

(Xilinx Answer 63921) How to force the value of a signal, wire, or reg to a certain value during simulation using Tcl commands?

BP (Breakpoint) Tcl Commands

(Xilinx Answer 63922) How to add breakpoint at a line of a HDL source using Tcl commands?

Linked Answer Records

Master Answer Records

Answer Number Answer Title Version Found Version Resolved
58796 Xilinx Simulation Solution Center - Design Assistant N/A N/A

Child Answer Records

AR# 58885
Date Created 12/18/2013
Last Updated 04/02/2015
Status Active
Type Solution Center
  • Vivado Design Suite