We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 58891

Xilinx Simulation Solution Center - Design Assistant - Third Party Simulators - Synopsys VCS​/VCS-MX


This Answer Record contains child answer records covering issues with Synopsys VCS/VCS-MX which is a supported simulator. The answer records provides explanation of these issues which you may face while using Synopsys VCS/VCS-MX . The answer record also contains information related to known issues and good coding practices.

Note: This article is part of Xilinx Simulation Solution Center Xilinx Answer 58795. The Xilinx Simulation Solution Center is available to address all questions related to Simulation. Whether you are starting a new design with Vivado Simulator or troubleshooting a problem with a supported third party simulator, use the Xilinx Simulation Solution Center to guide you to the right information.


(Xilinx Answer 56390) Vivado Simulation : How do I compile libraries and perform simulation in Vivado using Synopsys VCS

(Xilinx Answer 56490) How do I perform Simulation using Vivado 2013.2 and VCS?

(Xilinx Answer 58164) 2013.x - How do you run AXI BFM simulation with VCS?

(Xilinx Answer 57989) Vivado IP simulation - encrypted VHDL source cannot be read by VCS 

(Xilinx Answer 61846) 2014.2 - Vivado Simulator - Simulating the Zynq System Example Project in VCS

Linked Answer Records

Master Answer Records

Answer Number Answer Title Version Found Version Resolved
58800 Xilinx Simulation Solution Center - Design Assistant - Third Party Simulation Tools N/A N/A

Child Answer Records

AR# 58891
Date Created 12/18/2013
Last Updated 04/02/2015
Status Active
Type Solution Center
  • Vivado Design Suite