We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 59249

AXI BFM 2013.4 - Modifications to the example design are not reflected in the user testbench


In the GUI settings of an AXI BFM core, I changed the data bus width to 128 and the ID width to 8. Then, I generated the IP and output products and opened the example design. When examining the files, I can see that the changed data bus and ID widths have not propagated into cdn_axi4_example_test.v testbench that was created.

Is the user expected to modify the testbench of the example design?


The example design provided with the AXI BFM example is fixed and is not currently updated to reflect the user's design. The user will need to modify the testbench manually for a modified example design.

Automation of the example design will be investigated for a future release.

AR# 59249
Date Created 01/27/2014
Last Updated 02/07/2014
Status Active
Type General Article
  • FPGA Device Families
  • Vivado Design Suite - 2013.4
  • AXI Bus Functional Model