UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 5927

M1.5i Virtex - Pin2ucf: An incorrect signal name is used in the .ucf data for Clock signals in Virtex devices.

Description

Keywords: pin, lock, pin2ucf, Virtex

Urgency: Standard

General Description:
An incorrect signal name is used in the .ucf data for Clock signals in Virtex devices. (In a particular case, the signal clk was replaced by clk.PAD/PAD_SIG.)

Solution

You can work around this problem by manually changing the UCF data to the correct signal name.

This problem is fixed in the 2.1i release, scheduled for release in June, 1999.
AR# 5927
Date Created 03/16/1999
Last Updated 07/09/2001
Status Archive
Type General Article