We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 59284

MIG 7 Series DDR3/DDR2 - Manual Window Check feature does not work with VIO 2.0


Version Found: v2.0
Version Resolved: See (Xilinx Answer 54025)

The MIG 7 series example design has the ability to verify read and write window margin on a per-byte basis when the debug signals are enabled. This can be done using the automated flow or by manually incrementing and decrementing the PHASER taps to verify how much window margin is available. When using the manual flow, the user is required to send a single pulse event to the dbg_po/pi_f_inc/dec VIO signals to increment or decrement the taps once. However, the VIO 2.0 cores do not support single event pulse, so when the dbg_po/pi_f_inc/dec signals are toggled, the taps max out and the user is unable to accurately detect the edges of the data window.


This issue only affects the manual flow, so continue to use the automated flow to verify the read and write window margin on a per-byte basis.

Revision History
1/31/2014 - Initial release

Linked Answer Records

Master Answer Records

Answer Number Answer Title Version Found Version Resolved
54025 MIG 7 Series - IP Release Notes and Known Issues for Vivado 2013.1 and newer tool versions N/A N/A
AR# 59284
Date Created 01/31/2014
Last Updated 01/31/2014
Status Active
Type Known Issues
  • Artix-7
  • Kintex-7
  • Virtex-7
  • MIG 7 Series