We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 59564

LogiCORE 3GPP LTE MIMO Encoder v4.0(Rev. 4) - The event signals will always be '0'


Why are the event outputs of the core always '0'?


This happens because the event signals are not implemented by the core, as a result they are always '0'.

They do not consume any resources since the signals are not implemented in the core, all of the IP configurations will be affected.

Currently there is no work around for this issue as this feature is not present.

It is due to be implemented in the next version of this core.

Linked Answer Records

Master Answer Records

AR# 59564
Date Created 02/27/2014
Last Updated 06/18/2014
Status Active
Type General Article
  • 3GPP LTE MIMO Encoder