UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 59687

AXI BFM - How to disable reset check in AXI BFMs?

Description

The configuration value "DISABLE_RESET_VALUE_CHECKS" is used to enable/disable the checks for the reset value of input signals to the BFM.

For example, the salve BFM checks at reset time if the signals from the master are at the expected reset values.

Solution

By default this variable = 0, which means that reset checks are enabled.

However, you can disable using:
 

set_disable_reset_value_check(1)


And re-enable using:
 

set_disable_reset_value_checks(0)

AR# 59687
Date Created 03/07/2014
Last Updated 03/25/2015
Status Active
Type General Article
Devices
  • Zynq-7000
  • Artix-7
  • Kintex-7
  • Virtex-7
Tools
  • Vivado Design Suite - 2013.4
  • ISE Design Suite - 14.7
IP
  • AXI Bus Functional Model