UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 59853

PetaLinux - "ERROR: new format image overwritten - must RESET the board to recover" When Booting Image

Description

When I boot my Linux system, the UBOOT hand-off fails with the message below:

ERROR: new format image overwritten - must RESET the board to recover

Solution

This can occur if the system image (image.ub) is so large that it overlaps with the Linux kernels base address when extracted. 

This can be worked around by updating the "Netboot Offset" and Linux kernel base address in the PetaLinux system-level menuconfig. 

The specific location will vary from system to system and is dependent upon the size of the Linux kernel image.
AR# 59853
Date Created 03/19/2014
Last Updated 10/16/2014
Status Active
Type General Article
Tools
  • PetaLinux