Version Found: 2.0 Rev 3
Version Resolved: See (Xilinx Answer 54025)
When attempting to open the MIG 7 Series GUI within a Vivado project targeting the following devices, an error that the devices are not supported appears.
xq7a200t-1rb676M
xq7a200t-1rb484M
xq7a200t-1rs484M
MIG 7 Series designs can be generated for the same density in a -1I or a -1Q.
This issue only affects -1M parts.
Generate the design for a -1l or a -1Q as a work around until this support is added.
Revision History:
04/16/2014 - Initial Release
| AR# 60000 | |
|---|---|
| Date | 04/15/2014 |
| Status | Active |
| Type | Known Issues |
| Devices |
|
| IP |
|