UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 60292

XADC Wizard v3.0 Rev 3 - Vivado 2014.1 - Release Notes and Known Issues

Description

These Release Notes are for the XADC Wizard v3.0 Rev 3, released in Vivado 2014.1 and contain the following information:

  • General Information
  • New Features
  • Bug Fixes
  • Known Issues

Solution

General Information

The XADC Wizard v3.0 Rev 3 supports the 7 series and Zynq devices. 

You can use the Wizard to customize the I/O Ports usage, the User Alarms and Thresholds, and the Channel Sequencer.

New Features in v3.0 Rev 3

None

Bug Fixes in in v3.0 Rev 3

Corrected GUI enablement option in the default sequencer mode.

Known Issues v3.0 Rev 3

XADC Wizard v3.0 core in 2014.1 with XSIM simulator always gives zeros on DRP read data when ENABLE_EXTERNAL_MUX mode is set to "true".

Workaround: Use QuestaSim when ENABLE_EXTERNAL_MUX is set to "true"

XADC Wizard v3.0 core in 2014.1 asserts TVALID incorrectly for temperature channels in Simultaneous Selection Mode when Temperature bus is selected.

Workaround: Use channel sequencer mode

Revision History
04/15/14 - Initial Release

AR# 60292
Date Created 04/15/2014
Last Updated 05/09/2014
Status Active
Type Release Notes
Devices
  • Artix-7
  • Kintex-7
  • Virtex-7
  • Zynq-7000
Tools
  • Vivado Design Suite - 2014.1