We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 60411

Vivado 2014.1 BOOTSTS register is not correct


When I read the BOOTSTS register after a Multiboot attempt it appears as though all of the bits are not updated properly.


This will not work properly in Vivado 2014.1.  If you need the BOOTSTS register information please use Impact 14.7.

This is resolved in the 2014.2 release.

In Vivado 2014.2, If you need the latest status, you should run the refresh_hw_device first.  

refresh_hw_device [lindex [get_hw_devices] 0]
Once the device has been refreshed, the command to read the Boot Status Register is as follows:
refresh_hw_device -update_hw_probes false [lindex [get_hw_devices] 0]
report_property [lindex [get_hw_devices] 0] -regexp REGISTER.BOOT_STATUS.BIT.*
AR# 60411
Date 06/11/2014
Status Active
Type General Article
  • Artix-7
  • Kintex-7
  • Virtex-7
  • Vivado Design Suite - 2014.1
Page Bookmarked