UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 60527

MIG 7 Series - Virtex-7 HT - Error is generated when trying to open the MIG 7 Series tool when targeting a part with an flg package - Failed to generate custom UI outputs

Description

Version Found: MIG 7 Series v2.0 Rev3
Version Resolved: See (Xilinx Answer 54025)

An error is issued when trying to open MIG 7 Series to customize a memory interface for the following devices:

  • xc7vh580t-flg1155
  • xc7vh580t-flg1931
  • xc7vh870t-flg1932

The exact error is:

Failed to generate custom UI outputs.

This error is generated because while Vivado in 2014.1 added support for these FLG package parts, MIG does not yet support them.

Solution

These parts will be supported by MIG 7 Series in Vivado 2014.3.  

To work around this until then, please generate a MIG design targeting a compatible device.  

The design can then be used to target the FLG packages. 

The compatible parts are as follows:

  • xc7vh580t-flg1155 -> xc7vh580t-hcg1155
  • xc7vh580t-flg1931 -> xc7vh580t-hcg1931
  • xc7vh870t-flg1932 -> xc7vh870t-hcg1932                                                                                                                        

 

AR# 60527
Date Created 05/05/2014
Last Updated 05/27/2014
Status Active
Type Known Issues
Devices
  • Virtex-7 HT
IP
  • MIG 7 Series