UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 60631

2014.1 Logic Debug - Error while triggering ILA with option "Window data depth = 1" and "Number of windows > 1"

Description

The following error occurs while triggering ILA with the options "Number of windows = 1" and "Window data depth = 1"
 
ERROR: [Labtools 27-147] vcse_server: No trigger mark in any sample in window: 1.
ERROR: [Labtools 27-147] vcse_server: Could not get Parameter: trace_data.
ERROR: [Labtools 27-1829] vcse_server failed during internal command 'CseXsdb_getParameters'. See previous error messages.

If "Number of Windows" is set to greater than 1,  then I am able to trigger ILA with  "Window data depth = 1".

Solution

When the IP is used in Non-Storage Qual Mode 


Issue: Trigger mark is not found when the ILA is armed with Window count >= 1 & Sample depth per window is 1 

The window count comparator output is not properly detected in these scenarios.


When the IP is used in Storage Qual Mode

Issue: Trigger mark is not found when the ILA is armed with Window count >= 1 & Sample depth per window is 1 

In Storage Qual mode the trigger mark is not found only in cases where Window Counter = 1 & Sample depth per window is 1.


This is a known issue and will be fixed in a future release.

AR# 60631
Date Created 05/13/2014
Last Updated 01/16/2015
Status Active
Type Known Issues
Tools
  • Vivado Design Suite - 2014.1