UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 60815

XAPP794 - Why do I get the following error in implementation "ERROR: [Opt 31-30] Blackbox design_1_i/fmc_imageon_vita_receiver_1/U0/USER_LOGIC_I/VITA_CORE_I/ ... This blackbox cannot be found in the existing library."?

Description

The following errors are received in implementation:

ERROR: [Opt 31-30] Blackbox design_1_i/fmc_imageon_vita_receiver_1/U0/USER_LOGIC_I/VITA_CORE_I/ ... This blackbox cannot be found in the existing library.


ERROR: [Opt 31-30] Blackbox design_1_i/fmc_imageon_vita_receiver_1/U0/USER_LOGIC_I/VITA_CORE_I/vita_spi_txfifo_l/K7_GEN.afifo_32_v6_l (afifo_32_k7) is driving pin I5 of primitive cell design_1_i/fmc_imageon_vita_receiver_1/i_2736_4877_i_4. This blackbox cannot be found in the existing library.

Solution

This can happen if the user does not have a valid license for the IP in the design. 

More information can be found on Page 43 of XAPP794 (v1.3) December 20, 2013.
AR# 60815
Date Created 05/23/2014
Last Updated 05/27/2014
Status Active
Type General Article
Devices
  • Zynq-7000
Tools
  • Vivado Design Suite - 2013.2
IP
  • Chroma Resampler
  • Color Correction Matrix
  • Color Filter Array Interpolation
  • More
  • AXI4-Stream to Video Out
  • Defective Pixel Correction
  • Gamma Correction
  • Image Statistics Engine
  • Test Pattern Generator
  • Video Timing Controller
  • Video In to AXI4-Stream
  • Less
Boards & Kits
  • Zynq-7000 All Programmable SoC Video and Imaging Kit