UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 6090

1.5i Hitop- Equations in the Fitter Report don't have the .pin or .fb extensions when using ABEL

Description

Keywords: ABEL, fitter, report, .pin, .fb, equations, extensions, hitop, 9500

Urgency: Standard

General Description: The fitter report does not show the .pin extension, but
this does show up in the timing simulation.

Solution

This is fixed as of 2.1i.

The implemented equations are incorrect in the fitter report for ABEL
XC9500 designs. Designs were verified to have implemented correctly
and the signal should appear correctly in the timing simulation.


AR# 6090
Date Created 04/02/1999
Last Updated 08/27/2001
Status Archive
Type General Article