We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 60938

Vivado - Settings for -scripts_only on launch_runs are stored in vivado.ini


If I set a run to "Generate scripts only" via the Launch Selected Runs dialog, a setting appears in the vivado.ini file:


The next time I open a different project and I try to implement it, my run does not launch.

I can see that scripts were generated in the design runs dialog, but I have to go back to "properties" or "launch runs" to fix this issue.


This is expected behavior.
This setting is stored in vivado.ini and is used for all projects.
To work around this, you can to remove the setting in vivado.ini.
AR# 60938
Date Created 06/03/2014
Last Updated 12/12/2014
Status Active
Type General Article
  • Vivado Design Suite