We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 61066

LogiCORE Video Scaler v8.1 (Rev.3) - Why is the m_axis_tvalid output always low?


Why is the m_axis_tvalid output always low?


This is a known issue that that can affect the Video Scaler v7.00.a, v7.01.a and v8.0 (All Revisions).

If there is no output on the m_axis interface it is recommended that the user assert the m_axis_aresetn according to the reset requirements documented in Product Guide PG009.
AR# 61066
Date Created 06/09/2014
Last Updated 06/12/2014
Status Active
Type General Article
  • Video Scaler