We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 61344

2014.2 - Vivado IP Flows - When using the generate_target command for an IP with the parameter "all" selected, is the example design generated for the IP?


UG 835 contains a description for the "generate_target" command for an IP core. 

It appears that if the parameter "all" is applied to the "generate_target" command then the example design will be generated.

However, when "all" is selected, the example design in not generated. 

Is this expected behavior?


This is expected behavior and UG835 will be updated to clarify that selecting "all" will not generate the "example" design.

Note: You can generate the example design for certain IP by issuing the "open_example_project" command.

AR# 61344
Date 09/29/2014
Status Archive
Type General Article
  • Vivado Design Suite - 2014.2
Page Bookmarked