We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 61735

MIG UltraScale DDR3/DDR4 - Does MIG support manually issuing the REFRESH command?


Version Found: MIG UltraScale v5.0 Rev1

Does MIG support manually sending REFRESH commands?


No, MIG UltraScale does not yet support sending user controlled REFRESH commands.

Support for this will be in added a future release, and will include support for postponing and pulling-in of refreshes to help improve controller efficiency.  

Revision History
10/26/2014 - Updated
08/13/2014 - Initial Release


AR# 61735
Date 01/16/2015
Status Active
Type Known Issues
  • MIG UltraScale
Page Bookmarked