We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 62048

2014.2 Vivado Hardware Manager: Cannot configure Zynq PL when it is in independent mode via the JTAG port


Using the 2014.2 Vivado Hardware Manager, it is not possible to configure Zynq PL when it is in independent mode via the JTAG port.

The Hardware Manager hangs when the process bar is at 1% and never recovers from it. 


This is a known issue which is currently being addressed.

This is not an issue in 2014.1 or iMPACT 14.7.

This issue is fixed in Vivado Design Suite 2015.1.


AR# 62048
Date Created 09/16/2014
Last Updated 02/13/2015
Status Active
Type Known Issues
  • Zynq-7000
  • Vivado Design Suite - 2014.2
  • Vivado Design Suite - 2014.3