UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 62161

MIG 7 series - Errors that don't mean anything to the user are flagged when trying to customize the MIG core.

Description

Version Found: MIG 7 Series v2.1
Version Resolved: See (Xilinx Answer 54025)
 
When I try to customize the MIG core in my IPI design I receive the following errors:
 

ERROR: [Common 17-263] There was a syntax error while parsing filter expression: 'NAME==' at position '4'
ERROR: [Common 17-263] There was a syntax error while parsing filter expression: 'NAME==' at position '4'
ERROR: [Common 17-263] There was a syntax error while parsing filter expression: 'NAME==' at position '4'

 
 How can I resolve them?

Solution

 
These errors do not affect the user configuration or the IP behavior and can be safely ignored.
 
Revision History
09/24/2014 - Initial Release
 
Note: The "Version Found" column lists the version the problem was first discovered.
The problem also exists in earlier versions, but no specific testing has been performed to verify earlier versions.

Linked Answer Records

Master Answer Records

Answer Number Answer Title Version Found Version Resolved
54025 MIG 7 Series - IP Release Notes and Known Issues for Vivado 2013.1 and newer tool versions N/A N/A
AR# 62161
Date Created 09/23/2014
Last Updated 10/08/2014
Status Active
Type Known Issues
Devices
  • Kintex-7
  • Virtex-7
  • Artix-7
IP
  • MIG 7 Series