UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 62189

PlanAhead - [Common 17-70] Application Exception: processPRConstraints: Unable to find the config for run config_1

Description

When I implement my design in PlanAhead, I receive the following error:

[Common 17-70] Application Exception: processPRConstraints: Unable to find the config for run config_1

Solution

This error has been seen when implementing a Partial Reconfiguration (PR) design that does not yet have any partitions.

For a Partial Reconfiguration project, there should be a hd.xml file and an xpartition.pxml file.


Both are created and managed by PlanAhead for PR projects.

To verify if there are partitions, select Specify Partitions.

A PR design needs at least one reconfigurable partition.


To correct the issue, open the synthesized design and creating a reconfigurable partition.

This creates the hd.xml file that is needed and when you launch runs, the application error will no longer occur.

AR# 62189
Date Created 09/25/2014
Last Updated 10/02/2015
Status Active
Type General Article
Tools
  • PlanAhead