UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 62403

MIG 7 Series - Artix-7 CPG236 - Can this package support a memory interface, and why is it not possible to create one using MIG?

Description

From 2014.2 onwards it is not possible to create a memory interface in a CPG236 package.

Why is this and is there a workaround?

Solution

While it is still possible to create a Memory Interface in this package, it will be very limited.

This is because it is a small package and there are a low number of I/O available.

For this reason support was removed for it.

It is still possible to generate an 8bit DDR3 interface, for assistance please contact your local FAE.

Revision History:
10/08/2014 - Initial Release
AR# 62403
Date Created 10/08/2014
Last Updated 10/14/2014
Status Active
Type General Article
Devices
  • Artix-7
  • Artix-7Q