UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 62520

LogiCORE IP SMPTE2022-5/6 Video Over IP Transmitter v4.0 - Why is the Primary MAC address stuck at 0?

Description

Why is the Primary MAC address stuck at 0?

Solution

This is a known issue with the LogiCORE IP SMPTE2022-5/6 Video Over IP Transmitter v4.0.

It is resolved in the LogiCORE IP SMPTE2022-5/6 Video Over IP Transmitter v4.0 (Rev. 1).

This issue has been resolved in Vivado 2014.4 and later.


For Vivado 2014.3, you can work around this issue by downloading theSMPTE2022-5/6 Video Over IP Transmitter v4.0 (Rev. 1) from the AR62520_v_smpte2022_56_tx_v4_0_Rev_1_preliminary_rev1.zip link below.

INSTALLATION / USE:

  1. Extract the contents of the ".zip" archive to the desired patch directory location.

  2.  
  3. Set the MYVIVADO environment variable to point to this patch directory, for example:

    set MYVIVADO=C:\MYVIVADO\vivado-patch-AR62520\vivado\
  4. Run Vivado software tools from the original install location.

For more information on how to use the MYVIVADO environment variable, see (Xilinx Answer 53821).

Attachments

Associated Attachments

Linked Answer Records

Master Answer Records

Associated Answer Records

Answer Number Answer Title Version Found Version Resolved
53821 Vivado - How do I use the MYVIVADO environment variable to apply tactical patches? N/A N/A
AR# 62520
Date Created 10/16/2014
Last Updated 10/21/2014
Status Active
Type General Article
IP
  • SMPTE2022-5/6 Video over IP