We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 62730

2014.3 - IBERT - UltraScale - RESETFSM_OVERRIDE bit is set to 1 by default


The GTWiz reset override bit is set by default in GTY, which means that the state machine does not drive the GT reset pins.

It also renders the reset buttons in the GUI inoperable, unless RESETFSM_OVERRIDE is set back to 0 in the GUI.


To work around this, Set RESETFSM_OVERRIDE back to 0.
AR# 62730
Date 11/24/2014
Status Active
Type General Article
  • Kintex UltraScale
Page Bookmarked