We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 62813

MIG 7 Series - Multi-controller designs require custom part to be created for each controller


Version Found: MIG 7 Series v2.2
Version Resolved: See (Xilinx Answer 54025)
When creating a custom memory part for multi-controller designs the custom part must be recreated for each controller.


The MIG 7 Series custom part configuration will be stored in each controllers respective configuration files and cannot be viewed by other controllers. 

Because of this, a custom memory part must be created for each controller individually.

Revision History
24/11/2014 - Initial Release

Linked Answer Records

Master Answer Records

Answer Number Answer Title Version Found Version Resolved
54025 MIG 7 Series - IP Release Notes and Known Issues for Vivado 2013.1 and newer tool versions N/A N/A
AR# 62813
Date Created 11/12/2014
Last Updated 11/25/2014
Status Active
Type Known Issues
  • Kintex-7
  • Virtex-7
  • Artix-7
  • Vivado Design Suite - 2014.3
  • MIG 7 Series