We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 63038

Zynq-7000 AP SoC ZC706 Evaluation Kit - What is the I2C slave address for SFP/SFP+ Module?


What is the I2C bus address for the SFP/SFP+ Module?

(UG954) The ZC706 Evaluation Board User Guide v1.3 and the XTP215 ZC706 Schematics PDF Rev 1.1 state that the I2C slave address for the SFP/SFP+ module is 0b1010000.

Is this correct?


The I2C slave address for the SFP/SFP+ module depends on the PHY on the module connected to the SFP/SFP+ connector.
Please refer to the datasheet for the module you are using.
AR# 63038
Date Created 12/04/2014
Last Updated 12/08/2014
Status Active
Type General Article
  • Zynq-7000
Boards & Kits
  • Zynq-7000 All Programmable SoC ZC706 Evaluation Kit