We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 63126

2014.3 Partial Reconfiguration - Can I range a CLOCKREGION for a Reconfigurable Partition in an UltraScale Device


Because all site types except the config site of an UltraScale device are reconfigurable, I am attempting to range a CLOCKREGION for a Reconfigurable Partition in my UltraScale device.

However, no site in the clock region is included into the Pblock.


This has been updated in the 2015.1 release of Vivado.

When snapping mode is on, the CLOCKREGION ranges are supported by converting the DERIVED_RANGE to be a completely specified site range for the Programmable Units that they cover.

AR# 63126
Date Created 12/14/2014
Last Updated 05/01/2015
Status Active
Type General Article
  • Kintex UltraScale
  • Virtex UltraScale
  • Vivado Design Suite - 2014.3
  • Vivado Design Suite - 2014.4