We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 63355

2014.x Sysgen - The S-Function 'sysgen' in 'delay128_fifo/Black Box' has a mdlStart and a mdlProcessParameters function.


I am receiving the following error when I run simulation or generation.

The S-Function 'sysgen' in 'delay128_fifo/FIFO' has a mdlStart and a mdlProcessParameters function. This is not supported when used in a model referenced in normal mode, unless the S-Function has called ssSetModelReferenceNormalModeSupport with the value MDL_START_AND_MDL_PROCESS_PARAMS_OK

What is the cause of this error?


This error occurs when you try to use the 'Model' Simulink block.
This block is not currently supported by Sysgen.

Please use the 'Subsystem' block for creating hierarchy.
AR# 63355
Date Created 01/20/2015
Last Updated 02/18/2015
Status Active
Type General Article
  • System Generator for DSP
  • Vivado Design Suite - 2014.4