UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 63497

Vivado 2014.4 - Logic Debug - CseXsdb_getRegisters error after boot_hw_device [lindex [get_hw_devices 0]

Description

When I am trying to boot the configuration memory and later click on run trigger, I receive the error below.

After I get this error the run trigger will not trigger.

CseXsdb_getRegisters error after boot_hw_device [lindex [get_hw_devices 0]

Solution

In order to accommodate system dependent latency, booting from configuration memory will not issue a refresh_hw_device command.

You will need to issue a manual refresh_hw_device command after the system is in a stable state.
AR# 63497
Date Created 02/04/2015
Last Updated 03/11/2015
Status Active
Type General Article
Devices
  • FPGA Device Families