We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 63871

SDK 2015.1: Memory Accesses in XSDB Fails with the Error “Invalid address – it can hang PS interconnect"


When I try to access address regions such as AFI, PL regions, Linear QSPI etc, I encounter the following error message:

Invalid address - it can hang PS interconnect

Why does this error occur and how can I work around it?


The error occurs because access to some address ranges such as AFI, PL regions, Linear QSPI etc., is blocked by "hw_server" by default. 

To access these address ranges, you can load the Vivado hardware design using the "loadhw" command in XSDB, so that XSDB can set all of the valid ranges to "hw_server".

Alternatively, you can use the "memmap" command in XSDB to set a valid range. 

See the help for "loadhw" or "memmap" commands in XSDB for more details. 
AR# 63871
Date 04/30/2015
Status Active
Type General Article
  • Zynq-7000
  • Vivado Design Suite - 2015.1
Page Bookmarked